Office workers are inevitably exposed to office furniture, and now the most common office furniture is not a panel office furniture, so how do we maintain our panel office furniture to better extend the service life.
1. The ground on which the panel furniture is placed must be kept flat, and the four legs are balanced on the ground. If the panel furniture is placed in a state of frequent swaying and unstable, the fastening parts will inevitably fall off and the bonding part will crack over time, thereby affecting the use effect and reducing the life of the panel furniture. In addition, if the floor is soft and the panel furniture is unbalanced, do not use wooden boards or iron sheets to cushion the furniture legs, so even if the balance is maintained, it is difficult to bear even force, which will damage the internal structure of the panel furniture for a long time. The only way to compensate is to trim the ground, or lay a slightly larger area of hard rubber on the ground, so that the four legs of the panel furniture can land smoothly.
2. It is best to use pure cotton knitted cloth when removing the dust on the panel furniture, and then use a soft wool brush to remove the dust in the depressions or relief patterns. Paint-treated panel furniture should not be wiped with gasoline or organic solvents, but can be wiped with colorless furniture polishing wax to enhance luster and reduce dust.
3. The position of panel furniture should not be exposed to direct sunlight. Frequent sunlight will cause the paint film of furniture to fade, metal fittings are easy to oxidize and deteriorate, and wood is easy to become brittle. It is best to use curtains to block the sun in summer to protect panel furniture.
